Altronic DET1600

Altronic DET1600 klopdetectie monitor

The Altronic DET-1600 Detonation Sensing Monitor is a 24VDC-powered, 32-bit microprocessor-based electronic instrument designed for use on natural gas-fueled engines to detect detonation and misfire and avoid consequential engine damage. Industry-standard, low-cost, piezoelectric vibration sensors are mounted directly on the engine and are used to transform the vibrations caused by combustion into electrical signals which are then evaluated by the DET-1600.

Deze producten zijn onderdeel van een uitgebreider programma dat Hatraco levert. Voor meer informatie, graag contact met ons opnemen.

Request quotation

Close

Request quotation for Altronic DET1600

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Beeld-CAPTCHA
Voer de tekens in die op de afbeelding worden getoond.

Specifications

Power requirement

DC powered, 10-32VDC, 0.30 AMP max.

Ambient temp. range

–40°C to 85°C (–40°F to 185°F)

Sensors

Up to 16

Sensor type

Piezoelectric Vibration Sensor,Bosch 0 261 231 148 or equivalent

Keypad

8-key, membrane

Display

Backlit, 2x16 character, LCD

Display update rate

0.5 seconds nominal

Sensor scan rate

On Firing Event

Output switch

2 programmable, solid-state rated 200VDC,0.2 AMP continuous, optically isolated frompower supply, one for Alarm, one for Shutdown

Switch response time

Tied to Filter Value and Display Reading (withfilter at 1, max response time is approx. 0.5 sec.)

RS485 serial outputs

2

Current loop output

4-20mA

Hazardous area classification

Class I, Div. 2, Groups C & D for direct hook-up,Temp Code T4, max ambient temp 85°C